Honda WH15 Water Pump

FREE MAINLAND UK DELIVERY - CERTAIN POSTCODES, SCOTTISH ISLANDS, IRELAND WILL INCUR EXTRA COSTS WE WILL CONTACT YOU IF THIS IS THE CASE, IF UNSURE PLEASE CALL US ON 01260 278332.

The Honda WH 15 Water pump comes with a GX120 4-stroke engine that pumps 400 litres a minute with 5 bar of pressure and 2 hours running time. This is a 1.5" lightweight high pressure water pump, max output capacity 370 l/min.

These pumps are high pressure water cannons. Fully loaded with powerful water pressure. Specially designed to force out a large flow rate and high levels of pressure, our High pressure water pumps are perfect for pushing water a long way.

Made to defy gravity. With their unrivalled pressure, they can certainly push water uphill.

Honda's powerful High pressure pumps push out huge amounts of pressure – perfect for when you need to move water far and high. They’re ideal for long-hose irrigation or dust suppression; their high level of pressure is even suited to local fire fighting. You can count on a Honda in the face of emergency.

Get both power and stamina from the same pump.
Known as ‘total head’, it’s the maximum height the pump can force water from suction head to discharge head. Our High pressure pumps use their five bar of pressure to push water up to 50m – that’s around the length of five buses parked end to end.

High pressure - ideal for sprinklers or nozzles - With a maximum pressure of 57 psi, the WH15 is designed for a variety of applications requiring high pressure.

Easy starting Honda OHV commercial engine - The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.

98 gal./min. capacity

Cast iron volute and impeller - The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.

Easy carry handle - The WH15 is easy to transport wherever you need it.

Lightweight aluminum case

Engine: GX120
Displacement: 118cc
Bore and stroke: 2.4" x 1.7"
Compression Ratio: 8.5:1
Oil Alert: N/A
Pump type: High Pressure, Centrifugal, Self-priming
Volute: Rigid Mounted Cast Iron
Impeller: Cast Iron
Mechanical Seal (Pump case / impeller): Carbon/Ceramic
Priming time: 80 sec. at 16.4 ft.
Drive system: Direct
Discharge capacity: 98 gals./min.
Suction port diameter: 1.5" NPT
Discharge port diameter: 1.5" NPT
Total head lift: 131 ft.
Suction head lift: 26 ft.
Maximum pressure: 57 psi
Solids handling: N/A
Dimensions (LxWxH): 16.3" x 14.2" x 16.3"
Dry weight: 49 lbs.
Fuel Capacity: 0.53 gal
Run Time @ Max Discharge: 1.5 hr