Countax C50 with 38" XRD Deck & C Series PGC (LAST ONE AVAILABLE!)
£3,740.00 £4,400.00
Brands: Countax
Product Code: C50

Qty:

A feature packed garden tractor for gardens of around one acre.

The C50 is a fully specified Countax with a single cylinder 500cc Briggs and Stratton engine.
With a smaller 97cm (38") XRD cutter deck, the C50 is perfect for gardens with around one acre of lawn to cut or where there are specific limitations for access. The C50 features a power take-off. This allows you to drive accessories such as the Powered Grass Collector, Broadcast Spreader or Powered Scarifier.

This model comes with the C Series PGC (Powered Grass Collector) and the 38" XRD Deck included in the price.

Features

Briggs & Stratton 500cc Engine
The 500cc single cylinder Briggs & Stratton engine is fitted to the C50. A simple-to-maintain design, ensures a durable, long lasting engine.
- Displacement: 500cc
- Power (@3600rpm): 10.8kW
- Torque: 28.7NM
- Bore: 90.5mm
- Stroke: 77.8mm
- RPM: 3000
- Engine Oil Type: 10w30
- Engine Oil Amount: 1.4 litres


Deck height selection
Precisely control the height of cut. The lightweight deck height selector can be adjusted through nine incremental settings to provide a cutting height of 12mm to 101mm (dependent on type of deck).

The lever for the manual lift features a ‘trigger’ style locking system. The C Series and B Series tractors display the current height setting on the dashboard display.

Noise reduction
Low noise operation through good design, quality and specification. All our products are designed to produce the lowest levels of noise. Not only does this make operating a Countax more comfortable, it also ensures that our products fall within the levels issued by EU noise legislation.

Our tractors feature a double skinned bonnet which helps to reduce engine noise. Our unique cutting and collection system means that air disturbance from the cutting blades is minimised, further reducing unwanted sound.

Park brake
The Countax park brake system is a cleverly designed safety feature. It prevents the tractor from starting unless the brake is engaged. This important safety device is fitted as standard on all Countax models.

Operating Managment System (OMS) (C Series & B Series)
A simple to use dashboard display. All C and B Series tractors are fitted with OMS, Countax’s unique on-board computer. This system works independently from the main functions of the tractor, monitoring the engine, cutter deck and power take-off.

Most Countax tractors include a digital deck height indicator, low fuel warning and RPM counter. The RPM monitor on the electronic display indicates engine speed. If it falls below the optimum level when cutting dense grass, it is indicated on the dashboard, allowing you to raise the deck or reduce forward speed. This means the best possible cut for the conditions can be achieved.

Cast Front Axle
The heavy duty cast axle adds strength where it’s really needed on the tractor, enabling it to withstand the stresses of uneven terrain.

It’s been designed with commercial-style, tie-down points for safe transportation on a flatbed trailer.

Electric power take-off
C and B Series tractors feature a push-button controlled power take-off. Operators can choose from three PTO modes:

Position 1 engages the cutter deck only – perfect for rough-cutting without collection.
Position 2 switches on both the tractor and the PTO to drive the Powered Grass Collector – there is no separate lever or control required.
Position 3 will operate the PTO only – ideal for driving powered accessories such as the broadcast spreader or scarifier.

Single pressed steel body
Found on C and B Series tractors, the single pressed steel body is a stronger and more durable alternative to a traditional fabricated unit.

It has been specifically designed to reduce water collection points and has been tested to withstand over 500 hours continuous salt spray exposure, thereby helping to eliminate corrosion.

Adjustable seat
All Countax models feature an ergonomically designed, automotive style sliding seat for greater operator comfort and safety.

The seat can easily be adjusted using the fingertip control lever. An angled adjuster plate moves the operator down and closer to the pedals or up and further away. The seat fitted to four-wheel drive models and the larger A Series tractors has armrests for additional comfort and support. The armrests fold to make getting on and off the tractor easy.

Specifications
Model- C50
Engine- Briggs & Stratton Single Cylinder 500cc
Transmission- Hydrostatic Foot Control
Standard Cutter Deck- 38" (97cm) XRD rear discharge
Deck height settings- 12-101mm
PGC Capacity- 300 litres
Power Take-off- Standard (Electric Engage)
Bull Bar- Standard
OMS- Colour digital display
Wheel Size (Front/Rear) - 38/51cm (15"/20")
Dimensions (LxWxH exc PGC) - 187x103x114cm
Warranty- 3 Years

Countax tractors will be delivered personally within a 75 mile radius from our store (CW12 4XJ) or you may collect. They are delivered by one of our own staff and handed over personally to the customer, complying fully with the manufacturers guidelines. If you have any questions regarding delivery or machine handover please don't hesitate to contact us on 01260 278332.

Write a review

Note: HTML is not translated!