Kubota U10-3 Mini Digger with 3 Buckets
£13,995.00
Brand:: Kubota
Product Code: U10-3

Qty:

Kubota U10-3 Mini Digger with 2 Buckets.
This machine was manufactured in 2018.
It has 730.9 hours on the hour meter.


Ultra-compact. Enhanced operator protection. The efficient and easy-to-use Kubota U10-3 with zero tail swing is the mini-excavator you can count on to get the job done.

Kubota E-TVCS engine
Highly trusted in the compact excavator market, the efficient combustion created by Kubota's unique Three Vortex Combustion System reduces exhaust emission, noise and vibration. Its layout also puts most components within easy reach for faster maintenance.

ROPS
For additional protection, a foldable rollover protective structure is standard-equipped on the U10-3. Folding the ROPS down lets you easily transport the mini excavator on lorries, and travel under doorways to work indoors.

Adjustable track gauge
With easy, single-lever operation, theU10-3’s hydraulically adjustable track gauge reduces in seconds—down to 750m—to enable navigation in narrow spaces. Conversely, you can widen the track gauge all the way out to 990 mm to produce a 7% increase in stability, even while operating with hydraulic breakers.
When adjusted down to 750mm, the U10-3 can easily fit through most doorways, permitting access inside of buildings.

Protected hydraulic service port
With the U10-3, you’ll never add hydraulic service port pipes again—it comes equipped with them, all the way to the end of the boom. To reduce the risk of damaging the hydraulic piping,the U10-3’s pipes are hidden inside the boom.

Safer operation
To greatly reduce the risk of loose hoses from boom-mounted or hand-held attachments catching on nearby objects, the U10-3 has its hydraulic service port smartly located at the end of the boom.

Hydraulic control system
Fitted with hydraulic servo controls, theU10-3’s hydraulic control system means smoother operation, improved feel, and an increase in digging productivity of approximately 8%.

Two-piece design dozer hoses

When an on-site replacement of a dozer cylinder supply hose is necessary, its two-piece design simplifies the job.

Two-speed travel pedal
This new pedal lets you easily switch between high and low speeds, so you can work at your own pace. Simply depress the pedal for high-speed travel, or release it for low speed. This feature makes travelling between on-site locations more efficient.

Lifting points
To permit access to confined spaces, as well as easy transport, the U10-3 has a three-point lifting feature.

Walk-through operator space

Open at both ends, the U10-3 allows for quick entry or exit from either side.

Fully opening engine cover
Fast access to most of the engine’s components is made possible by the fully opening engine cover.

Protection
Notice the clean, hose-free look of the U10-3’s boom? That is because all of its hydraulic hoses are uniquely hidden and protected inside the boom. In addition, the boom cylinder is well protected due to its location at the top of the boom.

Zero tail swing

To operate at the highest level of safety, simply adjust track width to 990 mm. At this width, the rear counterweight will always be within the width of the track frame. This prevents any damage from occurring to the engine cover — allowing the operator to focus more on the job at hand.

USED: £13995 inc. VAT

OUR REF: 7484

Write a review

Note: HTML is not translated!