BCS Laser Scythe 80cm / 32" Cutter Bar Attachment
£588.00
Brand: BCS
Model: Laser Scythe 80cm - Please choose Oil Bath below
SKU: 92190978
BCS Laser® Scythe Cutter Bar

BCS Laser® Scythe Cutter Bar

IMPORTANT! All Scythe Cutter Bars require either a Short or Long Oil Transmission. This will depend on which Two Wheel Tractor model you have - please see table below. If unsure please contact us.

Cut vegetation of any height or density up to 1” thick with the Laser® scythe cutter bar. It's ideal for managing wildflower meadows and cutting long grasses for haymaking.

The scythe has anti-clog serrated blades that will effortlessly cut through woody material up to 1” diameter, including brambles and even first year saplings. They also excel at cutting tall grass, bracken, wildflowers and more.

The Laser® scythe cutter bar comprises two blades. The top blade moves from side to side and is fitted with a number of serrated triangular teeth.

The scythe makes a single scissor-like cut at the base of the vegetation, leaving the material whole. This is what makes the scythe the best tool for cutting long grass for haymaking and for cutting wildflowers.

Because the cutter bar is located out at the front of the machine it can get into areas that other mowers can’t, such as under fences, round the base of trees, at the edge of water, and so on.

The cutting height is easily increased or decreased from ¾” (2cm) to 3¼” (8cm) by adjusting the skids that are positioned on each side of the cutter bar.

They are also very economical to run as the power unit should never be on more than one-quarter throttle so fuel consumption is very low.

Are any couplers or toolbars needed?
If the power unit has the Implement Quick Coupling fitted then you will need an Additional Coupler.
Please note: The BCS 660HY and 750 power units have their own specific coupler.

Is there anything else required?
If the machine is being used on sloping banks then twin wheels or steel bank wheels are recommended to help improve traction and stability.

IMPORTANT! All Scythe Cutter Bars require either a Short or Long Oil Transmission. Please refer to Table below to look at options.

Scythe Cutter Bar
Cutting Width 80cm (32") 100cm (40") 115cm (45") 135cm (53") 155cm (61")
Cutting Height 2cm (¾") to 8cm (3¼")
No of Blades 15 19 23 27 30
Drive Movement Short oil bath Long oil bath Short oil bath Long oil bath Short oil bath Long oil bath Short oil bath Long oil bath Long oil bath
Recommended Working Speed 0.8 to 3.5 km/hr
PTO Rotation Clockwise
RPM PTO Unit 825 / 990
Dimensions (L W H) 51 x 80 x 43cm 60 x 80 x 43cm 51 x 100 x 43cm 60 x 100 x 43cm 51 x 115 x 43cm 60 x 115 x 43cm 51 x 135 x 43cm 60 x 135 x 43cm 60 x 155 x 43cm
Weight 33kg 34kg 36kg 37kg 38kg 42kg 41kg 45kg 48kg


Which power units will the scythe cutter bar fit to?

80cm (32") 100cm (40") 115cm (45") 135cm (53") 155cm (61")
Short oil bath Long oil bath Short oil bath Long oil bath Short oil bath Long oil bath Short oil bath Long oil bath Long oil bath
BCS 710
BCS 728
BCS 738
BCS 740
BCS 750
BCS 770HY
BCS 614
BCS 615 ✔*
BCS 618 ✔* ✔* ✔*
BCS 630
BCS 630WS
BCS 660HY

Write a review

Note: HTML is not translated!